430 Stainless Steel
DescriptionType 430 Stainless Steel is a low carbon ferritic stainless steel which, in mildly corrosive environments or atmospheric exposures, has corrosion resistance approaching that of some nickel-bearing stainless steels. This alloy is oxidation resistant at elevated temperatures. Type 430 is ductile, does not work harden readily, and can be formed using a variety of roll forming or mild stretch bending operations as well as the more common drawing and bending processes. Type 430 is ferromagnetic.SpecificationsASTM A240Typical ApplicationsSinks, sink rims, appliance trim, counter tops, dish washers, range hoods, flatware, architectural uses, roofing, siding and restaurant equipment.
316 and 316L Stainless Steel
DescriptionType 316 Stainless Steel is an austenitic chromium nickel stainless steel containing molybdenum. This addition increases general corrosion resistance, improves resistance to pitting from chloride ion solutions, and provides increased strength at elevated temperatures. Properties are similar to those of Type 304 except that this alloy is somewhat stronger at elevated temperatures. Corrosion resistance is improved, particularly against sulfuric, hydrochloric, acetic, formic and tartaric acids; acid sulfates and alkaline chlorides. Type 316L Stainless Steel is an extra-low carbon version of Type 316 that minimizes harmful carbide precipitation in the heat affected zone during welding.SpecificationsASTM A240, A666Typical Applicationsexhaust manifolds, furnace parts, heat exchangers, pharmaceutical and photographic equipment, valve and pump trim, chemical equipment, digesters, tanks, evaporators, pulp, paper and textile processing equipment, parts exposed to marine atmospheres and tubing
304 and 304L Stainless Steel
DescriptionType 304 Stainless Steel is the most widely used of the austenitic (chromium/nickel) stainless steels.In the annealed condition it is essentially non-magnetic and becomes slightly magnetic with the application of cold work.Type 304L Stainless Steel is preferred in welding applications to exclude the formation of chromiumcarbides during cooling in the heat affected region of the weld. These alloys represent an excellent combination of corrosion resistance and fabricability.SpecificationsType 304 – ASTM A240, ASTM A666, AMS 5513 Type 304L – ASTM A240, ASTM A666, AMS 5511ApplicationsType 304 Stainless Steel is the most widely used of the austenitic (chromium/nickel) stainless steels.In the annealed condition it is essentially non-magnetic and becomes slightly magnetic with the application of cold work.Type 304L Stainless Steel is preferred in welding applications to exclude the formation of chromium carbides during cooling in the heat affected region of the weld.These alloys represent an excellent combination of corrosion resistance and fabricability.DescriptionChemical equipment and piping, heat exchanger components, dairy and food handling equipment and utensils,cryogenic vessels and components, architectural and structural applications exposed to non-marine atmospheres
321 Stainless Steel
DescriptionType 321 Stainless Steel is a stabilized austenitic stainless steel similar to Type 304 but with a titanium addition of at least five times the carbon content. This titanium addition reduces or prevents carbide precipitation during welding and in 800 - 1500°F service. It also improves the elevated temperature properties of the alloy. Type 321 provides excellent resistance to oxidation and corrosion and possesses good creep strength. It is used primarily in applications involving continuous and intermittent service temperatures within the carbide precipitation range of 800 - 1500°F.SpecificationsASTM A240ApplicationsAnnealing covers, high-temperature tempering equipment, diesel and heavy duty automotive exhaust systems, firewalls, stack liners, boiler casings, welded pressure vessels, jet aircraft components, radiant super heaters, bellows and oil refinery equipment.